CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

Zero thickness plates

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 11, 2002, 02:17
Default Zero thickness plates
  #1
phuser
Guest
 
Posts: n/a
Hi all I wish to define a zero thickness inclined plate which does not seem to be possible in PHOENICS 3.4. Earlier, I used 3.2 for the same purpose and was advised that 3.4 be used for this. There is same problem with inclines inlets. Any experiences ? TIA
  Reply With Quote

Old   May 11, 2002, 07:17
Default Re: Zero thickness plates
  #2
S Roy
Guest
 
Posts: n/a
This is indeed important. Could anybody tell me how do I simualte an angled triangular plate in 3.3/3.4 version
  Reply With Quote

Old   June 7, 2002, 10:02
Default Re: Zero thickness plates
  #3
Jeremy Wu
Guest
 
Posts: n/a
Is it possible for you to give a finite thickness which is small enough compared with other dimensions and big enough to have fine grid cells covering it ?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PERFORATED PLATES María Elena Rodríguez FLUENT 37 March 22, 2015 20:35
Parallel plates pelli FLUENT 1 September 5, 2007 20:16
A question about flow between 2 plates John FLUENT 2 January 23, 2006 07:07
different bipolar-plates at pem fc --> grid transi korni FLUENT 2 June 2, 2005 23:19
thin conducting plates Suping Main CFD Forum 0 June 19, 2003 16:10


All times are GMT -4. The time now is 01:19.