CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   Cannot run multi-phase examples in the library (http://www.cfd-online.com/Forums/phoenics/51502-cannot-run-multi-phase-examples-library.html)

John November 1, 2002 17:07

Cannot run multi-phase examples in the library
 
Hi, Recently, I want to study the multi-phases flow by phoenics. However, when I tried to run several multi-phase examples in the libary, for example, p104, 105, 106 .., I got problems. I can load these examples normally but cannot run EARTH. I can see the convergence monitor windows popup in my screen but it closed quickly. Any suggestion? Thanks in advance

Vikas Kumar November 2, 2002 02:05

Re: Cannot run multi-phase examples in the library
 
I have tested the above lib. cases in PHOENICS 3.4. All cases are transient and working.

Vikas

John November 2, 2002 03:24

Re: Cannot run multi-phase examples in the library
 
Hi, can you try case no z146? I cannot run it by EARTH. Thanks

Vikas Kumar November 2, 2002 03:35

Re: Cannot run multi-phase examples in the library
 
z146 is also working after compiling Ground programme generated by Plant

Vikas

John November 2, 2002 06:12

Re: Cannot run multi-phase examples in the library
 
Thanks for you quick response. I am new to phoenics. Could you please tell me how to run case z146 step-by-step. I got lost in the sea of phronics's help manual.

Vikas Kumar November 2, 2002 06:31

Re: Cannot run multi-phase examples in the library
 
Please see the PHOENICS tutorial at this site

C:\phoenics\D_POLIS\D_LECS\GENERAL\TUTS.HTM

http://www.cham.co.uk/phoenics/d_pol...neral/tuts.htm

John November 2, 2002 07:01

Re: Cannot run multi-phase examples in the library
 
Thanks. Actually, there is no such document in Phoenics 3.3. It is really helpful to me. I will study it right away. Thank you agian.


All times are GMT -4. The time now is 18:11.