CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   Solidification X Compatible Phoenics Version (http://www.cfd-online.com/Forums/phoenics/51512-solidification-x-compatible-phoenics-version.html)

Henrique Argentieri November 14, 2002 09:57

Solidification X Compatible Phoenics Version
 
I bought a PDR/Cham NA/9 (Phoenics Demonstration Report) titled: "A fixed grid numerical methodology for phase change problems involving mushy region and convection in the melt". This PDR was run in the Phoenics-84 version 1.0 on April 1986. I reproduced the Q1 and Ground files and run in the Phoenics PVR version 3.3. The results are not similar. Is there some essential difference or incompatibility in those versions? P.S.: I can send the Q1 and Ground files or more explanation about the problem.

Thanks

H.P.LIU November 23, 2002 13:37

Re: Solidification X Compatible Phoenics Version
 
I think there are an compatible problem between the PHOENICS VR version and Dos Version, you can close the VR and run the program.

Argentieri December 6, 2002 14:02

Re: Solidification X Compatible Phoenics Version
 
I am running the program with VR closed, just with DOS version and the convergence isn't reached too. Is there some difference in the default's versions?


All times are GMT -4. The time now is 11:01.