CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   creat a spacial plane (http://www.cfd-online.com/Forums/phoenics/51530-creat-spacial-plane.html)

llunchun December 10, 2002 02:24

creat a spacial plane
 
I want to creat an spacial plane, but Phoenics couldn't realize it. Everytime, I create it ,Phoenics thought it as a blockage. For example, my plane is normal to X-axial and Y-axial plane, andthe angle with X-axial is 45 degree.

Olof Liungman December 16, 2002 07:28

Re: creat a spacial plane
 
Hi!

Could you give some more specifics? Do you mean "spatial" or "special"? What is the purpose of the plane? Is it the boundary of your grid? Do you use VR or direct Q1-coding?

Regards,

Olof

llunchun December 17, 2002 21:19

Re: creat a spacial plane
 
I want to create a special plane use VR. My plane is normal to the plane created by X-axial and Y-axial.and the angle with X-axial is 45 degree.

llunchun December 17, 2002 21:20

Re: creat a spacial plane
 
I want to create a special plane use VR. My plane is normal to the plane created by X-axial and Y-axial.and the angle with X-axial is 45 degree.

llunchun

Olof Liungman December 18, 2002 04:02

Re: creat a spacial plane
 
Hi, again!

I'm not very good at VR, but perhaps someone else might have an answer if you give more details of what you try to do and why. Rename your mrssage, for example "creating planes in VR" or such, and then maybe someone who is good at VR will take a look at your question. Remember, the more details the easier it is to help you.

Regards,

Olof


All times are GMT -4. The time now is 07:21.