CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

BFC-Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 26, 2002, 11:07
Default BFC-Problem
  #1
Manish
Guest
 
Posts: n/a
We have Phoenics version-3.2 I was working with body fitted cooardinating system, doing some tutorials, on this... first of all , when i open BFC-coordinate system, it give message warning - BFC cases should not be attempted in vr at present, but any how i have made the grid in BFC Grid menu. second big problem, domain is not changing according to grid , so i am unable to give inlet(object)outlet ,although vr is showing the grid, but grid(mesh) and domain is different... if any body can help me... thanks for reading , Regards.
  Reply With Quote

Old   December 26, 2002, 11:16
Default Re: BFC-Problem
  #2
Vikas Kumar
Guest
 
Posts: n/a
At the following sites BFC tutorials are there, please do it sequentially as mentioned below.

http://www.cham.co.uk/phoenics/d_pol...htmBody-Fitted Co-ordinates

BFC 1 - Points and Lines BFC 2 - Making Frames BFC 3 - Frame matching BFC 4 - Copy/Transfer BFC 5 - Boundary Conditions BFC 6 - A Simple Case

  Reply With Quote

Old   December 27, 2002, 07:53
Default BFC-Problem
  #3
Manish
Guest
 
Posts: n/a
Thanks for response(so fast).. But there is still same problem..here are steps.. -I did four tutorials step by step up to BFC-4, -at end of BFC-4, i was in BFC-menu, then i click ok, -it gave three options Continue, Plot, End, -I clicked End(which is necessary to return to main menu(geometry)) -still it is not showing the domain, coincided with geometry

due to this i am unable to give boundary conditions in next tut(BFC-5).. what should i do now ...
  Reply With Quote

Old   December 27, 2002, 09:31
Default Re: BFC-Problem
  #4
Vikas Kumar
Guest
 
Posts: n/a
Please send me Q1 file for BFC Tut-4, in which you are facing problem and also specify me the step.

  Reply With Quote

Old   December 27, 2002, 10:24
Default Re: BFC-Problem
  #5
Manish
Guest
 
Posts: n/a
will u please tell me how to save Q1, and how to send it, i open Edit menu, it has Q1, i click , it shows 134 lines,5041 character, how to get this file , i dont know, help me for this.. steps i told u in my last message, one thing more we have 3.2-v, not 3.5... i also perform the whole tuts, as directed in Satellite(tuts), but same problem, Thanks
  Reply With Quote

Old   December 27, 2002, 10:52
Default Re: BFC-Problem
  #6
Manish
Guest
 
Posts: n/a
sir, do you want me to send complete step by step detail, how i perform the tuts, i can also send that, should i...
  Reply With Quote

Old   February 27, 2003, 21:16
Default Re: BFC-Problem
  #7
cfd200
Guest
 
Posts: n/a
update your foftware to phoenics 3.5
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOF diffuse problem on two fluids problem Fang Jin FLUENT 5 February 17, 2011 06:38
Problem in Modelling Heat Transfer Problem Deepak R FLUENT 1 December 6, 2007 10:37
Problem in cavity flow problem saad Main CFD Forum 4 November 1, 2007 08:45
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
problem in solving "wave generation" problem san FLUENT 2 April 3, 2006 23:37


All times are GMT -4. The time now is 08:57.