CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

How to reuse q1 created by Phoenics V3.1 in V3.5

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 17, 2003, 17:28
Default How to reuse q1 created by Phoenics V3.1 in V3.5
  #1
Song
Guest
 
Posts: n/a
Dear all,

I have seriously problems in using q1 case file created by Phoenics V3.1 in V3.5 environment. Even the original mesh was changed in the new environment. The plate heat source was changed to adiabatic and etc. What should I do? To make things worse, I just couldn't find any documents to understand the Q1 language created by V3.1, such as:

OBJXX, NAME, PERSON-S

OBJXX, POSITION, X,Y,Z

OBJXX, SIZE, DX,DY,DZ

OBJXX, CLIPART, CUBE10

OBJXX, ROTATION,1

OBJXX, TYPE, PLATE

OBJ55, POROSITY, 0

OBJ55, HEAT, 29.9

Does the heat mean watts? or watts/square meters? Seems in V3.5, heat normally means watts and hevt means watts/square meter.

In addition, the original Q1 activate KERNG model and WDIS variable; however, when I rebuild the model in V3.5, it activate KERNG model and EPKE variable. Does this kind of change affect my convergence and result?

Really appreciate all your help.

Song

  Reply With Quote

Old   March 28, 2003, 05:02
Default Re: How to reuse q1 created by Phoenics V3.1 in V3
  #2
John Ludwig
Guest
 
Posts: n/a
A description of the Q1 settings created by Vr-Editor can be found in http://www.cham.co.uk/phoenics/d_pol...r326/q1set.htm. This refers to PHOENICS 3.5, but 3.1 was much the same. Information on changes between 3.4 qnd 3.5 can be found in http://www.cham.co.uk/phoenics/d_pol...s/tr002.htm#17. This information also applies to 3.1.

If your installaton has valid User Support, you can e-mail your Q1 (and any non-standard geometry files) to support@cham.co.uk, who can advise you on specific changes you may need to make.
  Reply With Quote

Old   April 2, 2003, 12:34
Default Re: How to reuse q1 created by Phoenics V3.1 in V3
  #3
Muna Babbkir
Guest
 
Posts: n/a
How can i use phida file to plot graphs ?
  Reply With Quote

Old   April 7, 2003, 04:47
Default Re: How to reuse q1 created by Phoenics V3.1 in V3
  #4
John Ludwig, CHAM
Guest
 
Posts: n/a
The PHIDA file is a direct-access unformatted version of the Earth output file, PHI. All the standard PHOENICS post-processors, VR-Viewer, PHOTON and AUTOPLOT can all read PHIDA files. AUTOPLOT produces X-Y graphs, the other two produce contour/vector flow visualisation plots. More information on AUTOPLOT is available in the POLIS Encyclopaedia under A. http://www.cham.co.uk/phoenics/d_polis/d_enc/auto.htm

Your question is too non-specific to give a more precise answer.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reuse state for different simulations reread input files axl OpenFOAM Paraview & paraFoam 2 July 11, 2008 12:05
Mesh is created in blocking Severin CFX 3 September 18, 2007 09:02
Post file is not created Julie Polyakh CD-adapco 8 January 12, 2004 15:28
How to rotate a new created object ? wyh Phoenics 4 November 11, 2003 05:18


All times are GMT -4. The time now is 18:19.