CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

Fix the heat transfer coefficient

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 15, 2003, 07:07
Default Fix the heat transfer coefficient
  #1
Karin
Guest
 
Posts: n/a
Is it possible to fix the heat transfer coefficient at certain walls? Or do you have to use the Stantionnumber instead?
  Reply With Quote

Old   May 19, 2003, 06:21
Default Re: Fix the heat transfer coefficient
  #2
John Ludwig, CHAM
Guest
 
Posts: n/a
In the VR-Editor, create a PLATE object. In the Attributes dialog, select 'Linear heat source' instead of 'Surface temperature'. You can then set the heat transfer coefficient in W/m^2/K as 'Coefficient' and the surface value (in C if the reference temperature is 273 or K if it is 0) as 'Value'.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat transfer coefficient andrew FLUENT 1 May 15, 2007 09:55
udf of heat transfer coefficient me FLUENT 1 June 24, 2005 15:05
HELP: How to get Heat transfer Coefficient? Benny FLUENT 4 June 6, 2005 12:42
heat transfer coefficient Vikas Kumar Phoenics 1 May 3, 2003 23:25
Heat transfer coefficient Eugene Main CFD Forum 4 January 14, 2002 12:48


All times are GMT -4. The time now is 21:55.