CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

process phi file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 10, 2003, 17:53
Default process phi file
  #1
Guoqing
Guest
 
Posts: n/a
I checked the previous threads and found once there was wonderful phoenics reader. but it is not available. Does anybody have that?

I have my own version. It's been working perfect till I found it could not deal with cases involve 'fine-grid-vol' settings. I checked the phi file, found it differs slight with others. I do not know where it puts the additional grid values. Could somebody give some hints to me?

Thanks in advance

Guoqing
  Reply With Quote

Old   June 11, 2003, 12:53
Default Re: process phi file
  #2
Vikas Kumar
Guest
 
Posts: n/a
Please note that PHOTON of PHOENICS 3.5 or lower version does not support Fine grid vol. You will not find true pressure profile. You can use only VR viewer for this.

Vikas
  Reply With Quote

Old   June 11, 2003, 13:28
Default Re: process phi file
  #3
Guoqing
Guest
 
Posts: n/a
but the VR must read the info from some data somewhere. I noticed the PHI have some extra format of data other than those created without fine grid vol. But I am not sure about the format. Thank Vikas for the note.
  Reply With Quote

Old   June 13, 2003, 00:09
Default Re: process phi file
  #4
wyh
Guest
 
Posts: n/a
you can read some information on PHI structure
  Reply With Quote

Old   June 16, 2003, 03:10
Default Re: process phi file
  #5
Eugene
Guest
 
Posts: n/a
Dear Guoqing! If you is interested in PHOENICS Reader, you may connect with me. About this software see at http://htex.mpei.ac.ru/~krinitsky/~index1.html Mail me to krinitsky@htex.mpei.ac.ru

  Reply With Quote

Old   June 16, 2003, 23:01
Default Re: process phi file
  #6
xqy
Guest
 
Posts: n/a
Hi,Eugene

your phoenics reader reports error when to process the PHI file of version 3.5 of phoenics. you should make some revisions in order to handle the phi file of version 3.5 phoenics correctly.

thanks in advance.
  Reply With Quote

Old   June 17, 2003, 03:17
Default Re: process phi file
  #7
Eugene
Guest
 
Posts: n/a
Dear Xqy! New version PHOENICS Reader is working with ver.3.5. For details you can write me to krinitsky@htex.mpei.ac.ru.

  Reply With Quote

Old   June 17, 2003, 21:54
Default Re: process phi file
  #8
xqy
Guest
 
Posts: n/a
thank you very much for your good work
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFD process chart manu FLUENT 1 March 31, 2008 13:18
Melting process bryan FLUENT 3 December 6, 2004 18:13
using injection file and parallel process Cindy Jones FLUENT 0 January 23, 2003 13:40
the process of CFX beginer CFX 2 November 7, 2001 11:39
How to process .usr file? Peter liang CD-adapco 1 September 11, 2001 02:44


All times are GMT -4. The time now is 21:53.