CFD Online URL
[Sponsors]
Home > Forums > Phoenics

Radiation flux to the wall surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 25, 2004, 02:32
Default Radiation flux to the wall surface
  #1
Jason
Guest
 
Posts: n/a
Hi there: I would like to output the value of the wall received the radiation flux (w/m2) and the new radiation flux the wall surface received, which variable is the wall radiation flux? Srad? Thanks.
  Reply With Quote

Old   May 26, 2004, 02:13
Default Re: Radiation flux to the wall surface
  #2
Jason
Guest
 
Posts: n/a
I am using PHOENICS v3.4 to calculate heat transfer and flow problem. The radiation model is Radiosity model built in PHOENICS. I would like to output the value of the wall received the radiation flux (w/m2) and the net radiation flux the wall surface received, which variable is the wall radiation flux? Srad? Thanks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
surface to surface radiation heat transfer? suresh CD-adapco 1 July 7, 2006 07:54
radiation flux cax FLUENT 1 July 6, 2006 08:32
Wall Heat Flux-Radiation crit CFX 1 February 9, 2006 10:01
radiation source or heat flux BC? pi CFX 4 September 10, 2004 11:44
Radiation/Heat Flux in CFX Post Soren CFX 1 July 2, 2002 13:55


All times are GMT -4. The time now is 00:40.