CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Phoenics (https://www.cfd-online.com/Forums/phoenics/)
-   -   output every step result (https://www.cfd-online.com/Forums/phoenics/51791-output-every-step-result.html)

linda September 1, 2004 23:27

output every step result
 
my question is how to set in phoenics ,which can output results to solution files at every time step

Rami September 2, 2004 03:22

Re: output every step result
 
Linda,

Add the following settings in your q1:

csg1 = S (to dump the output files as S1, S2, etc.)

idispa = 1 (the frequency of dumping, 1 sweep in your case)

idispb = 1 (the first sweep for dumping)

idispc = lsweep-idispa (the last sweep for dumping)

You can then load these files in photon and autoplot exactly as you do with the 'phi' file.


Carlos September 8, 2004 22:35

Re: output every step result
 
You may do what you want via VREditor (in case your PHOENICS version is 3.4 or higher).

Go to menu/output/field dumping push "page down"; in the line before the last you can choose how often you want to dump the results.

I can send you more information case you need.

Regards,


All times are GMT -4. The time now is 08:36.