|
[Sponsors] |
September 1, 2004, 22:27 |
output every step result
|
#1 |
Guest
Posts: n/a
|
my question is how to set in phoenics ,which can output results to solution files at every time step
|
|
September 2, 2004, 02:22 |
Re: output every step result
|
#2 |
Guest
Posts: n/a
|
Linda,
Add the following settings in your q1: csg1 = S (to dump the output files as S1, S2, etc.) idispa = 1 (the frequency of dumping, 1 sweep in your case) idispb = 1 (the first sweep for dumping) idispc = lsweep-idispa (the last sweep for dumping) You can then load these files in photon and autoplot exactly as you do with the 'phi' file. |
|
September 8, 2004, 21:35 |
Re: output every step result
|
#3 |
Guest
Posts: n/a
|
You may do what you want via VREditor (in case your PHOENICS version is 3.4 or higher).
Go to menu/output/field dumping push "page down"; in the line before the last you can choose how often you want to dump the results. I can send you more information case you need. Regards, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
running gambit journal step by step | giogio | FLUENT | 1 | March 10, 2008 14:03 |
can "output control " output Nu in expression? | prayskyer | CFX | 3 | July 7, 2006 19:37 |
Calculating coefficient from factional step result | zonexo | Main CFD Forum | 1 | December 2, 2005 08:49 |
define moving mesh for engine step by step | homan | FLUENT | 0 | October 26, 2005 03:27 |
How to output variables every time step? | Dazhi Guo | FLUENT | 4 | January 16, 2001 11:17 |