CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

plot- profile

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 11, 2005, 11:35
Default plot- profile
  #1
fevzi
Guest
 
Posts: n/a
Hi, is there any way I can set the following in the vr environment without editing in Q1.

PATCH (FIG1 ,PROFIL,17,17,17,17,1,34,1,1) PLOT(FIG1 ,P1 , 1.000000E+00, 0.000000E+00) PLOT(FIG1 ,U1 , 1.000000E+00, 0.000000E+00)

thank you
  Reply With Quote

Old   January 6, 2006, 18:56
Default Re: plot- profile
  #2
mick
Guest
 
Posts: n/a
Yes, through the menu you could use the PIL command section under say SOURCES or OUTPUT and just type the patch in. But easy to just hand edit the q1.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plot temperature profile David FLUENT 4 July 24, 2017 06:35
Plot scaled profile of jet and u using sample braennstroem OpenFOAM Post-Processing 1 September 16, 2008 14:05
(URGENT) plot density profile along a line? David FLUENT 1 October 11, 2006 23:56
how to plot velocity profile at any x-location Brendan FLUENT 3 June 13, 2006 02:32
plot the velocity profile Joe Trabo Main CFD Forum 2 January 13, 2003 23:23


All times are GMT -4. The time now is 22:09.