outlet inclination
 

Hello, I am trying shape one outlet of form that it if rabbet in exit of one the everything that is shaped horizontal of the following form: position: 0,43 x, 0,0 y and 0,32 in z, the configurations of rotation are: 0 in alpha, -30 in beta and 0 in theta. I am not obtaining to incase outlet with the saida one of the duct, therefore outlet is in two dimensions as can make?

Re: outlet inclination
 

please can you write proper english ! I am not able to understand your question neither anyone will be able to read it !

Re: outlet inclination
 

Angled outlets are now possible in very latest version of PHOENICS.

Re: outlet inclination
 

this is q1 file, How do the outlet in the end of it I finish duct?? This is phoenics 3.4

TALK=T;RUN( 1, 1)

************************************************** **********

Q1 created by VDI menu, Version 3.4, Date 10/08/01 CPVNAM=VDI;SPPNAM=Core ************************************************** ********** IRUNN = 1 ;LIBREF = 0 ************************************************** ********** Group 1. Run Title TEXT(No title has been set for this run. ) ************************************************** ********** Group 2. Transience STEADY = T ************************************************** ********** Groups 3, 4, 5 Grid Information

* Overall number of cells, RSET(M,NX,NY,NZ,tolerance) RSET(M,7,3,7)

* Set overall domain extent:

* xulast yvlast zwlast

name XSI= 2.000000E+00; YSI= 1.000000E+00; ZSI= 2.000000E+00 RSET(D,CHAM ) ************************************************** ********** Group 6. Body-Fitted coordinates

* X-cyclic boundaries switched XCYIZ( 3, T ) ; XCYIZ( 4, T ) ************************************************** ********** Group 7. Variables: STOREd,SOLVEd,NAMEd ONEPHS = T NAME(150) =PRPS STORE(PRPS)

************************************************** ********** Group 8. Terms & Devices ************************************************** ********** Group 9. Properties SETPRPS(1, 0) RHO1 = 1.189000E+00 PRESS0 = 1.000000E+05 TEMP0 = 2.730000E+02 CP1 = 1.005000E+03 ENUL = 1.544000E-05 ;ENUT = 0.000000E+00 DVO1DT = 3.410000E-03 ************************************************** ********** Group 10.Inter-Phase Transfer Processes ************************************************** ********** Group 11.Initialise Var/Porosity Fields

No PATCHes used for this Group

INIADD = F ************************************************** ********** Group 12. Convection and diffusion adjustments

No PATCHes used for this Group ************************************************** ********** Group 13. Boundary & Special Sources

No PATCHes used for this Group

EGWF = T ************************************************** ********** Group 14. Downstream Pressure For PARAB ************************************************** ********** Group 15. Terminate Sweeps LSWEEP = 1 RESFAC = 1.000000E-03 ************************************************** ********** Group 16. Terminate Iterations ************************************************** ********** Group 17. Relaxation ************************************************** ********** Group 18. Limits ************************************************** ********** Group 19. EARTH Calls To GROUND Station USEGRD = T ;USEGRX = T ASAP = T RADIA = 0.000000E+00 ;RADIB = 0.000000E+00 EMISS = 0.000000E+00 ************************************************** ********** Group 20. Preliminary Printout ECHO = T ************************************************** ********** Group 21. Print-out of Variables ************************************************** ********** Group 22. Monitor Print-Out IXMON = 4 ;IYMON = 2 ;IZMON = 2 NPRMON = 100000 NPRMNT = 1 TSTSWP = -1 ************************************************** ********** Group 23.Field Print-Out & Plot Control NPRINT = 100000 ISWPRF = 1 ;ISWPRL = 100000

No PATCHes used for this Group ************************************************** ********** Group 24. Dumps For Restarts NOWIPE = T

GVIEW(P,0.000000E+00,-3.058168E-01,-9.520896E-01) GVIEW(UP,0.000000E+00,-9.520896E-01,3.058168E-01)

> DOM, SIZE, 2.000000E+00, 1.000000E+00, 2.000000E+00
: DOM, MONIT, 5.000000E-01, 5.000000E-01, 5.000000E-01
: DOM, SCALE, 1.000000E+00, 1.000000E+00, 1.000000E+00
: DOM, SNAPSIZE, 1.000000E-02
: DOM, RELAX, 5.000000E-01

> OBJ1, NAME, INLET
: OBJ1, POSITION, 0.000000E+00, 0.000000E+00, 0.000000E+00
: OBJ1, SIZE, 1.000000E-01, 1.000000E-01, 0.000000E+00
: OBJ1, CLIPART, cylinder
: OBJ1, ROTATION24, 1
: OBJ1, TYPE, INLET
: OBJ1, PRESSURE, 0.000000E+00
: OBJ1, VELOCITY, 0.000000E+00, 0.000000E+00, 1.000000E+00
: OBJ1, TEMPERATURE, 0.000000E+00

> OBJ2, NAME, F1
: OBJ2, POSITION, 0.000000E+00, 0.000000E+00, 0.000000E+00
: OBJ2, SIZE, 1.000000E-01, 1.000000E-01, 9.040000E-01
: OBJ2, CLIPART, cylinder
: OBJ2, ROTATION24, 1
: OBJ2, TYPE, BLOCKAGE
: OBJ2, MATERIAL, 0
: OBJ2, ADIABATIC, 0.000000E+00, 0.000000E+00
: OBJ2, SCAL_FIXF, 0.000000E+00

> OBJ3, NAME, J1_30
: OBJ3, POSITION, 0.000000E+00, 0.000000E+00, 9.000000E-01
: OBJ3, SIZE, 1.870000E-01, 1.000000E-01, 1.000000E-01
: OBJ3, CLIPART, ring_pipe150
: OBJ3, ROTATION24, 19
: OBJ3, TYPE, BLOCKAGE
: OBJ3, MATERIAL, 0
: OBJ3, ADIABATIC, 0.000000E+00, 0.000000E+00
: OBJ3, SCAL_FIXF, 0.000000E+00

> OBJ4, NAME, F2
: OBJ4, POSITION, 4.300000E-01, 0.000000E+00, 3.200000E-01
: OBJ4, SIZE, 1.000000E-01, 1.000000E-01, 6.700000E-01
: OBJ4, ARBORIEN, 0.000000E+00,-3.000000E+01, 0.000000E+00
: OBJ4, CLIPART, cylinder
: OBJ4, ROTATION24, 1
: OBJ4, TYPE, BLOCKAGE
: OBJ4, MATERIAL, 0
: OBJ4, ADIABATIC, 0.000000E+00, 0.000000E+00
: OBJ4, SCAL_FIXF, 0.000000E+00

STOP

Re: outlet inclination
 

1/ Upgrade to v3.6.1 the menu far surpasses 3.4 2/ Set background to solid 3/ carve pipes from solid using enough cells to get a proper carved pipe distribution. 4/ Run for 1 sweep and check the PRPS, (is your solid pipe being carved out correctly). 5/ Your block joining the two pipes is an OK idea but you can choose a more appropriate object to give a less crude representation. 6/ Create a cylinder like your inlet and place it on the end of the exit pipe and set to outlet. 7/ Try rotating this outlet object, check the result file is the PATCH over which it is being applied what you expect. 8/ If this rotation does not work, then you will have to place the outlet object at the end of the pipe, unrotated and in line with the axis and have an outlet that slices through the pipe 9/ If this will not do then apply lots of outlets in a step manner like a staircase.

Upgrade to 3.6.1 it is so much better and easy for this type of thing.