CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   periodic boundary condition? (http://www.cfd-online.com/Forums/phoenics/52037-periodic-boundary-condition.html)

Sima Baheri March 26, 2006 03:48

periodic boundary condition?
 
I use ICEM-CFD as a grid generation software for PHOENICS. My geometry is very complex so I use multi-block method. It's a turbomachinery problem so I need periodic boundary condition but cyclic boundary condition in main menu/sources) doesn't work in this case. I'd be grateful if you help me.

Regards Sima Baheri

ahmad homayoon May 30, 2006 11:34

what is your problem?
 
hi sima I have torbomashinary problem too. My problem is von karman fan that I must simulate fluid beetwin two blade with fluent. and i have some problem about bundery condition .could you give me some information about periodic condition and your problem? best regard

Sima Baheri May 31, 2006 03:25

Re: what is your problem?
 
Dear Mr. Homayoon

My problem is turbine blade film cooling. I have to take one pitch of cooling holes and use periodic boundary condition, because of the high number of grids to be used.

I couldn't solve my problem yet.

Best Regards Sima Baheri

neelam singh July 7, 2006 03:48

Re: what is your problem?
 
how to define periodic boundary condition in simulation of taylor couette flow using gambit and fluent?



All times are GMT -4. The time now is 06:31.