CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

how to deremine boundary layer height?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 5, 2006, 05:22
Default how to deremine boundary layer height?
  #1
Mike
Guest
 
Posts: n/a
I have faecd a fact that from manual thet when u are going to capture near wall region you have to refine mesh at near wall region ,and your y plus should be in limit of 11.In your boundary layer there should be 10 nodes.but how to determine this hight.i.e. there should be these much nodes in this hight so that we can mesh according to that. Thaks in advance.

  Reply With Quote

Old   April 6, 2006, 13:23
Default Re: how to deremine boundary layer height?
  #2
Sima Baheri
Guest
 
Posts: n/a
Dear Mr. Mike

I have a question. For using wall function, we should have a yplus greater tha 50, since the log law is satisfied in this yplus. Isn't it?
  Reply With Quote

Old   March 7, 2007, 13:47
Default Re: how to deremine boundary layer height? *NM*
  #3
sad chemloul
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Height of boundary layer DAK565656 CFX 2 April 19, 2007 11:30
how to deremine boundary layer height? Mike NUMECA 1 January 9, 2007 14:14
how to deremine boundary layer height? Mike CFX 5 April 6, 2006 08:15
how to deremine boundary layer height? Mike CD-adapco 1 April 5, 2006 10:47
how to deremine boundary layer height? Mike FLUENT 1 April 5, 2006 09:34


All times are GMT -4. The time now is 18:17.