CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

changing of k-e model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 18, 2006, 04:52
Default changing of k-e model
  #1
Sima Baheri
Guest
 
Posts: n/a
Hi every one

I want to use the standard k-e model with the anisotropic model of Bergeles. In this model in order to account for the anisotropy of the turbulent exchange processes in these flows, Bergeles et al. proposed to substitute the eddy-viscosity appearing in the lateral components of the Reynolds stresses and scalar fluxes by an increased value. So I have to change the standard k-e model. How can I do this in PHOENICS? I'd be grateful if you help me.

Best Regards Sima Baheri

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing RPM Amir Hossein Birjandi FLUENT 2 March 4, 2008 01:51
changing model constants in k-e turbulence model Sunil CFX 3 October 3, 2006 12:12
changing geometry yann CD-adapco 7 February 17, 2006 06:40
changing boundaries sankar CD-adapco 4 February 26, 2005 06:33
Changing BC Riham FLUENT 5 January 15, 2004 21:54


All times are GMT -4. The time now is 10:28.