CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   imprting CAD geometry (http://www.cfd-online.com/Forums/phoenics/52076-imprting-cad-geometry.html)

George July 7, 2006 12:36

imprting CAD geometry
 
Does anyone have a summary on how to (if possible) import CAD geometry into Phoenics. Thanks in advance

Michael July 9, 2006 14:00

Re: imprting CAD geometry
 
The CAD import procedure is explained in the PHOENICS VR Reference Manual CHAM TR 326, a copy of which can accessed on-line in html or word format at the following url:

http://www.cham.co.uk/phoenics/d_pol...r000/tr000.htm

The CAD file format should be STL, ASCII or binary in recent releases, but only ASCII in earlier releases of PHOENICS.


All times are GMT -4. The time now is 19:12.