CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   circulating fluidized bed (http://www.cfd-online.com/Forums/phoenics/52079-circulating-fluidized-bed.html)

Özgür Baysal July 12, 2006 08:45

circulating fluidized bed
 
Hi,

I am going to study on numerical modeling of circulating fluidized bed for my thesis subject. I have a problem with creating geometry in Cartesian coordinates when I use Phoenics. Should I create the geometry in body fitted coordinates, or should I write a new program?

Thanks for your help

mrabti July 13, 2006 10:48

Re: circulating fluidized bed
 
there is many examples in phoenics using plant option which treat such problems. Salam


Simhan September 24, 2006 23:42

Re: circulating fluidized bed
 
We have also attempting to model CFBC circuit and have done with single phase (air flow) with good sucees with cartesian coordiantes.

We are attempting to incorporate two phase using IPSA model with bed dynamics also

We may share our progress in CFBC modelling in PHOENICS for better & quicker working

M.Lakshminarasimhan

özgür baysal November 7, 2006 10:59

Re: circulating fluidized bed
 
Thanks Simhan and Mrabti. I'm working 3-D CFB simulation. At my problem particul Reynols Number is changing between 20 and 150. Can I use Low-Reynols Model. Thanks for your help.

muthu kumar August 24, 2007 05:59

circulating fluidized bed
 
plz sent me journal regarding cfd for fluidized bed combustion..... and its expremental values....

RaviInder Singh September 10, 2007 05:18

Re: circulating fluidized bed
 
Kindly Guide me about CFD of Circulating Fluidized Boiler It is urgent and most important.

Ravi Inder Singh Department of Mechanical Engineering Guru Nanak Dev Engineering College Ludhiana

max March 14, 2008 18:08

Re: circulating fluidized bed
 
I need this subject for my thesis

MUHAMMAD AHMAD November 23, 2008 09:51

Re: circulating fluidized bed
 
To carry out the EXPERIMENTAL WORK on emission control using the circulating fluidized bed combustion techonology.

zoha February 21, 2009 07:26

Re: circulating fluidized bed
 
Hi, I want a tutorial about mass transfer(solid-gas) in fludized bed, Have you any tutorial on Fluidized Bed simulation?, If it is possible for you, please give me some information about it. best regards zoha vatani


Jay_1984 June 17, 2010 00:25

to simulate inertial effects on solid particles in fluid
 
For inertial effects on solid particles in fluid, which model should i use. Particle tracking or solid particles. I am new to CFX. Please help me Its urgent.

maazulmosaid April 29, 2014 08:39

Have somebody data about cfbc modeling.. please share with me.. it looks like you guys are ahead of me

any tutorial files? please help


All times are GMT -4. The time now is 05:30.