|
[Sponsors] |
January 2, 2006, 07:43 |
Boundary Condition
|
#1 |
Guest
Posts: n/a
|
Hello, I try it another time. I`m a Student from RWTH Aachen and I need to know a possibility, how one can set different heat transfer coefficients at the opposite sides of a blockage object as boundary condition? I want to compute a simple simulation for the heat transfer through a wall. Thanks Katja
|
|
January 3, 2006, 05:37 |
Re: Boundary Condition
|
#2 |
Guest
Posts: n/a
|
A possibility is to create a WALL-TYPE user-defined object for each opposite surface of the object. The resulting patches will over-ride the EGWF(Earth-generated-wall-function) application on the interface boundary conditions on the two opposite surfaces. These wall-type user-defined objects will have CO=GRND2 VAL=0.0 for the wall-aligned velocities, CO=GRND2 VAL=GRND2 for ke and ep, and CO=Heat transfer coefficient VAL=SAME for TEM1. In the first instance it would be advisable to test this out on a very simple case so as to allow checking of the results.
In PHOENICS V3.6.1 I believe that you can specify a heat transfer coefficient for the blockage object as an alternative to the heat transfer coefficient computed automatically by the wall functions. If you do this, then of course, only one WALL-TYPE patch need be applied, as described above, so as to specify the other heat transfer coefficient. |
|
January 9, 2006, 12:02 |
Re: Boundary Condition
|
#3 |
Guest
Posts: n/a
|
Thank you Mike, I will try it out
|
|
March 11, 2006, 07:39 |
periodic boundary condition?
|
#4 |
Guest
Posts: n/a
|
How can we apply periodic boundary condition in Phoenics, when the grid has been created in ICE-CFD?
|
|
April 19, 2006, 01:05 |
Boundary Condition( Hypersonic Reactive flow)
|
#5 |
Guest
Posts: n/a
|
Hello,
I need to know about the far field as well as solid boundary condition for hypersonic reactive flow. Thanking you, Pabitra |
|
December 12, 2006, 16:15 |
how to apply periodic boundary conditions in ansys
|
#6 |
Guest
Posts: n/a
|
can any one tell me how to apply periodic boundary conditions in ansys
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boundary condition for UDS | Tomik | FLUENT | 0 | December 5, 2006 17:37 |
Boundary condition of the third kind or Danckwertz boundary condition | plage | OpenFOAM Running, Solving & CFD | 4 | October 3, 2006 12:21 |
Slip Boundary Condition for Moving Boundary | Shukla | Main CFD Forum | 3 | November 11, 2005 15:02 |
UDF boundary condition | Jeff | FLUENT | 2 | November 20, 2003 17:15 |
Boundary Condition in LES | Zhang Tsiang | Main CFD Forum | 3 | February 5, 2002 20:15 |