CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   tecplot translator problem (http://www.cfd-online.com/Forums/phoenics/52150-tecplot-translator-problem.html)

sochoa February 9, 2007 06:22

tecplot translator problem
 
Hi,

I have a trouble translating a phi file to a tecplot file. Curiously, the same tecexe (built by me) works well with another (flame) case. I get the next message:

Main data file type : 0 - PHI

1 - PHIDA

3 - Grid only 0

Enter file name - RETURN for default: phi phi2 TITLE = FLAME2 20 NX = 16 NY = 72 NZ = 326

Opening PATGEO file

Enter PATGEO file name - RETURN for default: patgeo

/ for none / Reading PATGEO file

Number of blocks found = 1 Reading the coordinates Reading the PRPS numbers Reading scalars Reading velocities Starting TECPLOT file startio: error in format apparent state: unit 16 named tecplt.dat last format: (**(2H,",A4,1H")) lately writing sequential formatted external IO Aborted

I do not access to the main translator subroutine, i.e.

CALL TECMAIN(PDA,XDA,STORE,NOBLK,BFC,CARTES,ONEPHS,COMM ,

1 CCC1,CCC2,CRT1,CRT2,BLANK,PRP,ANS,NAME,TITLE,TECNA M,FORM,

2 PHINAM,XYZNAM,PATNAM,NAM,VEL,IJKBLK,NMAP,IWORK,LIN K,WORK,

3 COORD,XFRAC,PHI,PRPS,VEL1,VEL2,MAXVAR,MAXNOD,MAXEL E,MAXLNK,

4 MAXBLK,SHT,OPN,LUPHI,LUPDA,LUXYZ,LUPAT,LUERR,LUTEC ,LENREC,NBYT)

Any solution???


Mehdi BEN HAJ February 9, 2007 10:06

Re: tecplot translator problem
 
Normaly,

The translator generates a file named tecplt.dat and it's easy to read it with tecplot.

If any problem, contact me by Email.

A+


All times are GMT -4. The time now is 18:35.