CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

LSOLID activation problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 3, 2007, 23:47
Default LSOLID activation problem
  #1
Danko Davidovic
Guest
 
Posts: n/a
I would like to use LSOLID command in the GXKNVST function to check if the cell is occupied by blockage, but it seems I need to modify the COMMON statements in order to enable this command active. Or should I modify the GROUND file as well? So far I somehow get F output (LSOLID is logical command) for all cells in the domain. By the way, where I can find more detailed description of the variables usually listed in the COMMON statements at the beginning of most subroutines in PHEONICS. It seems that Encyclopedia does not help much with that. I would appreciate any prompt help. This problem has been dragging me for couple of days and I need to solve it urgently.
  Reply With Quote

Old   April 4, 2007, 15:59
Default Re: LSOLID activation problem
  #2
danko davidovic valjevo
Guest
 
Posts: n/a
pozdrav

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
low re model activation error in 6.2 Anindya Sengupta FLUENT 2 June 29, 2005 17:33
about activation energy fanadam Main CFD Forum 2 June 24, 2002 13:26
about activation energy fanadam Phoenics 0 June 23, 2002 23:08
about activation energy fanadam FLUENT 0 June 23, 2002 23:04
cell layer (de)activation Jochen Trenner CD-adapco 5 November 3, 2000 16:28


All times are GMT -4. The time now is 19:40.