CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   Importing fuel injector, can Phoenics handle it? (http://www.cfd-online.com/Forums/phoenics/52179-importing-fuel-injector-can-phoenics-handle.html)

Mangy May 12, 2007 11:25

Importing fuel injector, can Phoenics handle it?
 
Hi all, I am new to the forum and thanks for having me. I am about to sit down with my first copy of phoenics, heres what I need it to do, but before I sit here for 100 hours learning the interface I feel it prudent I ask before I continue...

I need to model a fuel injector. In many oil burner and kerosene nozzle, there are internal bodies that rotate or spin the flow of liquid causing a fine atomisation at the tip of the nozzle as the fluid speeds up its RPM as its constriced down to the orifice. I have modelled several different injector's which I can export to STL easily enough, though can phoenics model a flow in a pipe around lets say a screw for example, down to a tiny orifice and show what will happen when it reaches the air at the tip and up to a few inches from the nozzle? Will it be hard to tell if its atomised in the air? THanks for your time gentlemen, I look foward to seeing what this program can do. Best wishes. Mangy.

pamela May 21, 2007 04:15

Re: Importing fuel injector, can Phoenics handle i
 
hi


All times are GMT -4. The time now is 11:49.