CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

Output Pressure reults for rotating wheel. HELP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 2, 2007, 15:11
Default Output Pressure reults for rotating wheel. HELP
  #1
Krishan Parmar
Guest
 
Posts: n/a
Hello everyone, I'm working on my project looking at turbulence for a rotating wheel. The problem I have is that the stagnation pressure on a rotating wheel is not directly head on (As with a non-rotating wheel). Therefore I found out that there is a function that plots the pressure values for a given area within the grid (i.e around the wheel). Does anyone know how to do this. I searched through the POLIS encyclopaedia but with no luck. Any help would be most appreciated as I cannot do any more analysis without this!!

Thanks everyone

Krish
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pressure input, mass flow output Venugopal Bachu Main CFD Forum 0 January 11, 2007 11:01
Rotating bike wheel E. Turner FLUENT 3 October 1, 2006 01:44
advise - literature rotating wheel brian Main CFD Forum 0 June 29, 2006 16:58
how to output the static pressure of transient Fred FLUENT 0 January 11, 2006 03:27
fluent output pressure of elements in xyz Fred FLUENT 3 July 16, 2005 04:51


All times are GMT -4. The time now is 04:39.