CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   Print results and set boundary condition (http://www.cfd-online.com/Forums/phoenics/52198-print-results-set-boundary-condition.html)

Kenneth Lam September 22, 2007 00:42

Print results and set boundary condition
 
We stimulate Air Ventilation Assessment (AVA), micro-climate around buildings, neutral ventilation and thermal comfort within buildings by FLAIR.

Question 1: Apart form visal presentation of the results by FLAIR-Viewer or extracting a spot result at monitoring probe, we could not generate a result table (text form) summarizing all the results (e.g. PMV, air velocity, etc) within a concerned area or a plane. It would be important for us to summarize these results in a report. How can we make this?

Question 2: We need to set the simulated air velocity around the building as boundary condition to further simulate the air flow path and magnitude into and inside a building (neutral ventilation). How can we make this?

Thanks!


All times are GMT -4. The time now is 15:51.