CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

single STL or separate solids for heat transfer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 5, 2007, 07:57
Default single STL or separate solids for heat transfer
  #1
Anastasia
Guest
 
Posts: n/a
i've imported an an entire autocad 3d geometry as a single stl file, do i have to keep seperate my 3d solids and import them one by one as a stl files if i have to do the simulation of the heat transfer?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heat produced during single phase combustion dace CFX 0 January 9, 2009 13:42
flow/heat transfer through heat sink (with fins)? Pei-Ying Hsieh Main CFD Forum 1 January 26, 2008 07:33
Single face with excessively high Heat Trans Coeff mat w FLUENT 3 April 10, 2006 12:38
heat capacity=f(T) in solids Micha CD-adapco 0 July 18, 2003 06:48
time steps in transient heat transfer in solids Mike Main CFD Forum 3 June 5, 2003 05:47


All times are GMT -4. The time now is 05:12.