CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

How to simulate a static pressure sensor ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 3, 2008, 07:40
Default How to simulate a static pressure sensor ?
  #1
axel cole
Guest
 
Posts: n/a
Hy guys,

i would like to simulate a static pressure sensor on a duct. I've put a small diameter pipe on the duct surface. I'd like to know which boundary condition i must impose on the top of the small diameter pipe. Do you think that a WALL boundary condition could be right?

Thanks in advance
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to simulate a static pressure sensor ? axel cole NUMECA 1 August 22, 2008 20:01
How to simulate a static pressure sensor? axel cole CD-adapco 1 April 16, 2008 17:49
How to simulate a static pressure sensor? axel cole FLUENT 3 April 4, 2008 09:20
How to simulate a static pressure sensor ? axel cole CFX 0 April 3, 2008 07:39
How to simulate a static pressure sensor ? axel cole Main CFD Forum 0 April 3, 2008 07:38


All times are GMT -4. The time now is 07:42.