CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

Question about inlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 16, 2008, 11:21
Default Question about inlet
  #1
mahe
Guest
 
Posts: n/a
Hello everyone

I have a question on inlet boundary condition.At inlet,I can choose to give the three velocity components,vol flow rate or the mass flow rate.I want to know the differences when phoenics deal with three different inlet boundary conditions.For example,the area of inlet is s,the velocity of z direction is w and the density is rho.Will I gain the same flow field if I set the inlet boundary conditions as Vz=w,vol flow rate=w*s,mass flow rate=rho*w*s respectively when other conditions is the same ? Could anyone help me? Thank you for your answers.
  Reply With Quote

Old   September 16, 2008, 12:11
Default Re: Question about inlet
  #2
Allen Badeau
Guest
 
Posts: n/a
Dear Mahe...You will gain the same as long as they are specified correctly and the flow conditions are the same, e.g. mutliphase flow activation, etc.

Best Wishes, Allen

-- ACS Consulting Dr. Allen E. Badeau Jr. 2023 Ices Ferry Dr. Morgantown, WV 26508 304-685-2310 cfdconsu@cfd-consulting.org www.cfd-consulting.org

ACS Consulting is the US representative for CHAM's CFD Software package PHOENICS...performing CFD better, faster, and cheaper!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
velocity profile inlet boundary condition question Lcw FLUENT 3 August 3, 2012 05:53
velocity inlet vs pressure inlet cheong FLUENT 6 April 9, 2011 03:07
Question about pressure inlet boundary condition. Alina FLUENT 1 November 30, 2007 08:39
How to set smoke inlet speed on inlet Adam FLUENT 0 October 4, 2005 08:18
Question about inlet and outlet BC babyface Main CFD Forum 1 January 15, 2003 10:17


All times are GMT -4. The time now is 14:45.