CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

error message in VR viewer for PARSOL

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 13, 2009, 18:59
Default error message in VR viewer for PARSOL
  #1
Eliseo Martinez
Guest
 
Posts: n/a
Dear PHOENICS users

I am simulating an air flow around a complex geometry with cut cell method (PARSOL) and I have had problems when I execute the post processor (VR viewer) because appears the next error message: "There is insufficient storage space for all the cut-cell data. Only the firts 30000 cells will be displayed correctly. To enable all cells to be displayed, please reset the parameter MXCT in satlit.for to 131513 then re-build satellite.

I have changed the MXCT value and have rebuilded the satellite but appears the same message error. How can I solve the problem?

  Reply With Quote

Old   February 16, 2009, 06:39
Default Re: error message in VR viewer for PARSOL
  #2
Alex
Guest
 
Posts: n/a
I also want to know how to solve your problem. Before that when you execute satellite, do you execute the public or private satellite. ( On PHOENIC Commander-Option-Run Version -satellite - prompt ) just to make sure.

You can run also run on PHOTON to get for post processing
  Reply With Quote

Old   February 16, 2009, 22:07
Default Re: error message in VR viewer for PARSOL
  #3
Eliseo Martinez
Guest
 
Posts: n/a
I have executed the satellite, earth, and photon on private option.

I have found that the phi_file is read at 100% but the problem is in the PBCL_file because the message appears when the file is read.
  Reply With Quote

Old   February 17, 2009, 03:30
Default Re: error message in VR viewer for PARSOL
  #4
Alex
Guest
 
Posts: n/a
Since the engineering problem that you are computing now is not opened to everyone except you. My suggestion is that you can solve the problem with a little bit less density of grid than the one you have currently computed. Jst to check if the problem is still occur with the private option for satlit.for, earth.for and photon.for
  Reply With Quote

Old   February 17, 2009, 14:23
Default Re: error message in VR viewer for PARSOL
  #5
Eliseo Martinez
Guest
 
Posts: n/a
I have used a less density of mesh and there are not problems. Moreover, I have simulated without PARSOL and there are not problems. So, I suppose that there is any conection between the error and the RAM memory in the computer but I am not sure
  Reply With Quote

Old   February 19, 2009, 05:34
Default Re: error message in VR viewer for PARSOL
  #6
Alex
Guest
 
Posts: n/a
It is a good news. Perhaps you can show the results to your superior, so that you have an ample time to make further inquiries with CHAM. I am sure they can provide you with more helpful information
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error message-Floating point error Vaibhav FLUENT 3 December 7, 2007 06:38
VR viewer error message for PARSOL Vikas Kumar Phoenics 1 June 4, 2003 17:36
PARSOL & FGEM Vikas Kumar Phoenics 0 May 21, 2003 07:53
Gambit 2.0 - Error Message (ACIS ERROR 1200) James FLUENT 1 May 14, 2003 08:13
PARSOL Leon Phoenics 1 August 2, 2002 11:33


All times are GMT -4. The time now is 21:51.