Problem with importing .stl file

March 4, 2009, 16:15

I have created a clean .stl file using Google Sketchup with several individual buildings. When I import the .stl file into Phoenics most of the buildings are now at different heights/elevations and are floating above the ground. Has anyone had a similar problem? How did you fix it? I rebuilt the Sketchup File and .stl file multiple times to make sure its clean, but no matter what I do the buildings are floating all at different elevations in Phoenics. Ryan

cavangk1 · April 15, 2009, 13:17

When you import, should choose "Object constrained by Domain " and choose "Yes"
The trouble with google sketchup is also much,'cause phoenics only recieve the solid file.You may use 3D max to do it, I have no trouble with 3D max

shineone · April 23, 2009, 02:28

I also made models in Sketchup, then i export DXF from Skechup, but the shape of buildings are totally changed. please tell me what can i do

quezacolatus · June 23, 2009, 03:40

Hi, I use Inventor and works just fine with any STL.
When importing STL at the second dialog click - import geometry from file and see if that holds. The constrict by domain is of no help and has nothing to do with the floating or anything.

mukut · April 21, 2010, 07:30

Have u used any SFTP, FTP and SCP client for transferring ur .stl file to phoenics directory? If so, during transfer check the transfer option. I have fetched same problem earlier time. change the transferring mood as TEXT and try to load again .stl file in phoenics.

harishr_jack · May 15, 2010, 03:18

Ryan,
are you importing as 2-3 models of STL or single stl?
I can give you a solution for your reply
Regards,

Hari V.B.

March 4, 2009, 16:15	Problem with importing .stl file	#1
RJD Guest Posts: n/a	I have created a clean .stl file using Google Sketchup with several individual buildings. When I import the .stl file into Phoenics most of the buildings are now at different heights/elevations and are floating above the ground. Has anyone had a similar problem? How did you fix it? I rebuilt the Sketchup File and .stl file multiple times to make sure its clean, but no matter what I do the buildings are floating all at different elevations in Phoenics. Ryan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem importing iges file to Gambit	Tassos	FLUENT	0	May 7, 2008 04:28
Problem with importing CAD file	skc	CD-adapco	3	December 4, 2006 04:37
Importing of Meshed file	Venu	FLUENT	1	August 23, 2005 13:00
Importing dxf file format	Jonathan	FLUENT	2	March 25, 2004 05:25
Importing I-DEAS unv file	hbetb	FLUENT	1	August 10, 2001 13:22

April 15, 2009, 13:17		#2
cavangk1 New Member Nguyen Ngoc Tu Join Date: Apr 2009 Posts: 2 Rep Power: 0	When you import, should choose "Object constrained by Domain " and choose "Yes" The trouble with google sketchup is also much,'cause phoenics only recieve the solid file.You may use 3D max to do it, I have no trouble with 3D max

April 23, 2009, 02:28		#3
shineone New Member MARK Join Date: Apr 2009 Posts: 9 Rep Power: 6	I also made models in Sketchup, then i export DXF from Skechup, but the shape of buildings are totally changed. please tell me what can i do

June 23, 2009, 03:40		#4
quezacolatus New Member Ianus George Join Date: Jun 2009 Posts: 19 Rep Power: 5	Hi, I use Inventor and works just fine with any STL. When importing STL at the second dialog click - import geometry from file and see if that holds. The constrict by domain is of no help and has nothing to do with the floating or anything.

April 21, 2010, 07:30		#5
mukut Member MuKuT Join Date: Mar 2009 Location: Tokyo, Japan Posts: 53 Rep Power: 6	Have u used any SFTP, FTP and SCP client for transferring ur .stl file to phoenics directory? If so, during transfer check the transfer option. I have fetched same problem earlier time. change the transferring mood as TEXT and try to load again .stl file in phoenics.

May 15, 2010, 03:18		#6
harishr_jack New Member hari Join Date: Mar 2009 Posts: 9 Rep Power: 6	Ryan, are you importing as 2-3 models of STL or single stl? I can give you a solution for your reply Regards, Hari V.B.