CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   Temperature MODEL (http://www.cfd-online.com/Forums/phoenics/67018-temperature-model.html)

quezacolatus July 31, 2009 04:15

Temperature MODEL
 
I have a question regarding Transient cases with a Energy Equation - Temperature setup.
When I want to get the field dump for each timestep for various parameters I get the appropriate results but for Temperature.
How do I get all the intermediate values for temperature?
Not only the final values.

Thanks in advance.

phoenics_cfd July 31, 2009 06:45

The OUTPUT options for field dumping are discussed here:

http://www.cham.co.uk/phoenics/d_pol...n-men.htm#Main Menu - Output

In the foregoing, look under "Output - Dump Settings" for a detailed descriptions of the various output controls. In the VR Editor under "Menu">"Output">"Field Dumping", if the "OUTPUT 3" for TEM1 has been toggled to "Y", then the temperature field should be written to the PHI files dumped at intermediate time steps.


All times are GMT -4. The time now is 03:37.