CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   i need help (http://www.cfd-online.com/Forums/phoenics/74591-i-need-help.html)

thebest200 April 3, 2010 21:04

i need help
 
everytime i install the phoenics software every thing is installed but after i click on it it doesnt open it just shows the program main window and closes quickly i tried to install in different systems in xp and windows 7 and same problem :confused:

Monse April 9, 2010 19:22

Could you be more specific? What version are you trying to install? What window are you trying to open?

thebest200 April 9, 2010 20:25

Quote:

Originally Posted by Monse (Post 254019)
Could you be more specific? What version are you trying to install? What window are you trying to open?

phoenics 3.5 and i tried in both windows 7 64 bit and xp sp3 32 bit and same problem in both the program opens and closes and never starts :(

thebest200 May 1, 2010 19:49

no 1 is going to help me :(

mukut May 10, 2010 05:42

Send me a copy, then I will try n inform: bdcrown007[at]yahoo.com

Monse May 20, 2010 19:52

Hello, did you solve your problem? :)

ga5aq June 29, 2010 18:19

Hi I am not sure this is the same issue I have had when I first installed Phoenics but I have solved it by following the troubleshooting written in the booklet (TR110 INSTALLATION OF INTEL PHOENICS -VERSION 2008) I have received with the program

I quote: When I run the sequential solver (EARTH) nothing happens on the screen and no error messages are displayed, and no result file is created.

Sequential EARTH requires a dummy library mpich.dll to be accessible. This library file is located in d_utils/d_windf and can be copied from there to your working folder.

Alternatively you can add the folder
" \phoenics\d_utils\d_windf " to your PATH

hope this helps :)


All times are GMT -4. The time now is 00:32.