CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   KECHEN Problem (http://www.cfd-online.com/Forums/phoenics/82346-kechen-problem.html)

quezacolatus November 24, 2010 05:00

KECHEN Problem
 
Hey guys,

I just switched from a 32bits version of Phoenics to a 64 and previous ran simulations (with KECHEN as turbulence model - chemical reaction combustion) now do not run in this new version and I don't have a clue why. The error I keep receiving in the 4th sweep and says this "GROUND called from FN2 and GREX3 but no setting made. Please check. Patch name = KESOURSE Variable name EP, INDVAR = 13 f index = 7844900 f value=HEATBL".
I mentioned that I did not modify the standard KECHEN model, nor the constants. It's a simple 3D square simulation where the KECHEN does not work. The exact same thing ran on 32 bits. Anyone have some ideas why this might be happening?

Thanks


All times are GMT -4. The time now is 13:38.