CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

KECHEN Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 24, 2010, 06:00
Default KECHEN Problem
  #1
New Member
 
Ianus George
Join Date: Jun 2009
Posts: 20
Rep Power: 8
quezacolatus is on a distinguished road
Hey guys,

I just switched from a 32bits version of Phoenics to a 64 and previous ran simulations (with KECHEN as turbulence model - chemical reaction combustion) now do not run in this new version and I don't have a clue why. The error I keep receiving in the 4th sweep and says this "GROUND called from FN2 and GREX3 but no setting made. Please check. Patch name = KESOURSE Variable name EP, INDVAR = 13 f index = 7844900 f value=HEATBL".
I mentioned that I did not modify the standard KECHEN model, nor the constants. It's a simple 3D square simulation where the KECHEN does not work. The exact same thing ran on 32 bits. Anyone have some ideas why this might be happening?

Thanks
quezacolatus is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 04:43
Incoherent problem table in hollow-fiber spinning Gianni FLUENT 0 April 5, 2008 10:33
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 14:52


All times are GMT -4. The time now is 00:53.