IS Phoenics good for multiphase simulation

zino · April 26, 2011, 20:47

I am a beginner in phoenics, I just wanted to know whether phoenics is better in multiphase gas-solid or gas-liquid case. should i go with it? if yes then how can i start learning work in it. i have worked on fluent before.

Welshnathan · April 30, 2011, 19:38

You may have to wait a while to get a good reply on this forum (PHOENICS). It's a lot less active than the fluent one.
Here are a few links to get you started:
CHAM website:
http://www.cham.co.uk/
POLIS help and online information system:
http://www.cham.co.uk/ChmSupport/polis.php

Here is a very good page contained within the POLIS system on multi-phase flow simulation in PHOENICS:
http://www.cham.co.uk/phoenics/d_pol...c/multphfl.htm

Good luck!

April 26, 2011, 20:47	IS Phoenics good for multiphase simulation	#1
zino New Member zino Join Date: Mar 2010 Posts: 23 Rep Power: 4	I am a beginner in phoenics, I just wanted to know whether phoenics is better in multiphase gas-solid or gas-liquid case. should i go with it? if yes then how can i start learning work in it. i have worked on fluent before.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flow simulation in a Pelton turbine nozzle	fivos	FLUENT	0	April 19, 2011 11:46
Is Solidworks Flow Simulation Good?	corriolisforce	Main CFD Forum	0	September 14, 2010 10:48
about boat simulation	hasim	FLOW-3D	12	March 29, 2010 09:34
Solar Radiation in OpenFOAM	plainstyle	OpenFOAM Running, Solving & CFD	14	December 1, 2009 13:17
MFX output of simulation time	Richard	CFX	0	October 10, 2008 09:50

April 30, 2011, 19:38		#2
Welshnathan New Member Nathan Join Date: Mar 2011 Posts: 6 Rep Power: 3	You may have to wait a while to get a good reply on this forum (PHOENICS). It's a lot less active than the fluent one. Here are a few links to get you started: CHAM website: http://www.cham.co.uk/ POLIS help and online information system: http://www.cham.co.uk/ChmSupport/polis.php Here is a very good page contained within the POLIS system on multi-phase flow simulation in PHOENICS: http://www.cham.co.uk/phoenics/d_pol...c/multphfl.htm Good luck!