CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   [Pointwise] cannot set "fan" boundary condition to 2D Ducted fan model (http://www.cfd-online.com/Forums/pointwise/110929-pointwise-cannot-set-fan-boundary-condition-2d-ducted-fan-model.html)

brksnn December 26, 2012 05:52

[Pointwise] cannot set "fan" boundary condition to 2D Ducted fan model
 
1 Attachment(s)
Hi everyone,

I am trying to mesh 2D Ducted Fan and attach the following picture as you can see. The program doesnt specify the fan boundary condition, but if I erase one of domains around fan, it can specify the fan. After setting fan boundary condition, I am creating a domain and then it automatically erase fan itself.

I looking forward to helping me...

jchawner January 11, 2013 10:05

Hi Burak:

Pointwise likes the edges between domains to have a connection boundary condition. However, you should be able to override that by setting the fan condition. Because I can't tell exactly what your grid looks like from the image I suggest you contact tech support directly at support@pointwise.com.


All times are GMT -4. The time now is 23:50.