CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   Mesh for KIVA using GRIDGEN (http://www.cfd-online.com/Forums/pointwise/11487-mesh-kiva-using-gridgen.html)

Srivastava May 19, 2006 11:25

Mesh for KIVA using GRIDGEN
 
Hi,

Can a mesh generated using GRIDGEN be converted into itape17 to be used in KIVA-3V or is k3prep the only grid generator for KIVA-3V?

Any help would be appreciated.

Thanks, SS


John Chawner May 20, 2006 21:52

Re: Mesh for KIVA using GRIDGEN
 
Hello Srivastava. Yes, Gridgen can be used to generate meshes for KIVA. PLOT3D files were exported from Gridgen and a translator called K3PREP was used to convert them to KIVA files. Hope this helps.

anand May 21, 2006 06:53

Re: Mesh for KIVA using GRIDGEN
 
hi srivastava

U can try ICEM CFD for kiva grid i mean in itape17 format and can be used for KIVA3 solver code ..ICEM got kiva converter ...wish u all the best

anand


All times are GMT -4. The time now is 02:52.