CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   Urgent: Gridgen-to-Fluent 2d hybrid mesh import (http://www.cfd-online.com/Forums/pointwise/117295-urgent-gridgen-fluent-2d-hybrid-mesh-import.html)

j_h_86 May 6, 2013 08:36

Urgent: Gridgen-to-Fluent 2d hybrid mesh import
 
2 Attachment(s)
Dear all,

I deal several days now with the following problem:

2d hybrid mesh in Gridgen to Fluent
-the mesh was realized with 2 different blocks (one structured at the left edge and one unstructured one for the rest of the domain)
-while exporting the mesh to Fluent the error message of uncovered edges occurred
-to visualize these edges, I imported the mesh into ICEMCFD and made a mesh check (see attached images).
-as you can see, all the cells along the boundaries of the 2 blocks are uncovered

Can you give me a hint, what I am doing wrong? It seems to be a simple case but I do not find a solution.

Best regards

jchawner May 17, 2013 09:40

Johannes: I suggest you contact our technical support engineers at support@pointwise.com.


All times are GMT -4. The time now is 16:36.