CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   Gridgen Export to Fluent5/6 failure due to memory (http://www.cfd-online.com/Forums/pointwise/14023-gridgen-export-fluent5-6-failure-due-memory.html)

ND August 29, 2007 02:44

Gridgen Export to Fluent5/6 failure due to memory
 
Hi, I am trying to export a file of size around 3 million from Gridgen to Fluent5/6 Case files. I select the Analysis Software (ASW) as Fluent5/6 and when I export it, it fails. The message I get is asw_export_fluent: Memory allocation of 660 MB failed. I have tried to increase the default memory in the unstructured block tab but of no benefit. RAM of my hardware is 1.5 GB and is not being utilized fully. Any suggestions? Thanks in advance. ND

John Chawner September 1, 2007 10:06

Re: Gridgen Export to Fluent5/6 failure due to mem
 
Hello ND,

Gridgen Tech Support will be able to provide you with strategies on how to work around this issue. You can contact them at 888-GRIDGEN or support@pointwise.com.


Naveed September 1, 2007 10:28

Re: Gridgen Export to Fluent5/6 failure due to mem
 
Thanks John, It's sorted now.


All times are GMT -4. The time now is 13:34.