|November 4, 2014, 14:12||
DLR F6 grid
Join Date: Sep 2013
Location: Delft, The Netherlands
Posts: 28Rep Power: 3
Where can I find a DLR F6 mesh file ready to be loaded into pointwise?
Thanks for your help,
|November 4, 2014, 15:40||
Join Date: Jul 2010
Location: Arlington, TX
Posts: 127Rep Power: 7
The DLR-F6 mesh is not available on the Pointwise site. However, you can download the NASA CRM grid from http://www.pointwise.com/webinar/drag/ if you're interested.
|November 4, 2014, 23:38||
Join Date: Mar 2009
Location: Ottawa, ON, CAN
Posts: 369Rep Power: 12
Check out the ftp site from 2nd Drag Prediction Workshop, which used the DLR-F6:
There are a bunch of pre-made grids available, some of which you might be able to load into Pointwise. Checkout the README.html for complete information. You might be able to import PLOT3D, structured CGNS or fully unstructured (no prisms) CGNS files depending on the versions.
This geometry was actually a unstructured meshing tutorial in Gridgen so you could check that out for tips if you want to go that route.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Dynamic Mesh resulting in Curved Grid Lines||adubois||FLUENT||3||April 17, 2014 10:06|
|MapFields to New Grid For Extreme Grid Deformations due to Body Motion||albcem||OpenFOAM||0||May 5, 2009 14:17|
|GRID TO GRID INTERPOLATION in FLUENT||calogero||FLUENT||3||June 4, 2003 08:32|
|Combustion Convergence problems||Art Stretton||Phoenics||5||April 2, 2002 05:59|
|Troubles modelling flow through a grid||Hans Klaufus||CFX||1||June 28, 2000 16:43|