CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   Gridgen :Incline a domain (http://www.cfd-online.com/Forums/pointwise/15559-gridgen-incline-domain.html)

manitee August 12, 2008 16:47

Gridgen :Incline a domain
 
How can one incline a domain (by 45 degrees say w.r.t. x axis)

Thanks


Chris Sideroff August 13, 2008 10:00

Re: Gridgen :Incline a domain
 
- Connector -> Modify -> Translate - Select a connector on the domain you want to incline - Pick a point on the connector as a reference point to move; in your case, it would be easiest to pick the end-point of the connector - Translate this point such the line connecting its new location and the point below are inclined to the x-axis by 45 deg. - Done - Done Replace - Maintain Linkages

The last option is important as it will maintain the connectivity to other connectors and automatically recompute the domain.

Does this help? Or are you simply trying to rotate the domain about the x-axis, while keeping the shape of the domain fixed?

manitee August 13, 2008 15:16

Re: Gridgen :Incline a domain
 
Hi Chris I tried what you said, but translating the connector moves it parallely, it didn't rotate it. And how can say it's 45 degrees just by looking at it? I am still confused. I tried the rotate command but didn't work.

Any suggestions Thanks alot

Chris Sideroff August 14, 2008 14:14

Re: Gridgen :Incline a domain
 
Again, I am a little confused as to what you're trying to do. Maybe sketch up a diagram of what you're trying to do and email it to me and I'll post back.

manitee August 18, 2008 10:59

Re: Gridgen :Incline a domain
 
Hi Chris, I emailed the .gg file to support@pointwise.com

Can you please take a look?

Thanks



All times are GMT -4. The time now is 23:39.