|
[Sponsors] |
August 28, 2016, 01:26 |
Proximity Refinement
|
#1 |
New Member
jack sparrow
Join Date: Jan 2015
Posts: 16
Rep Power: 11 |
Hi,
Is there an automatic sizing function in Pointwise as there is in ANSYS? The reason why I ask is because I need to grid the tip gap (clearance) for a compressor blade. Thanks |
|
August 28, 2016, 18:02 |
|
#2 |
Senior Member
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 275
Rep Power: 18 |
Hi Jack. I've never used ANSYS so I'm not certain I know exactly what feature you're wanting but I think the answer is "no."
Best Regards
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner |
|
August 28, 2016, 18:07 |
|
#3 |
New Member
jack sparrow
Join Date: Jan 2015
Posts: 16
Rep Power: 11 |
Thanks. Then do you have any clue how I would go about gridding a tip gap for a blade?
|
|
August 28, 2016, 18:10 |
|
#4 |
Senior Member
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 275
Rep Power: 18 |
That's a really open-ended question depending on your grid type, the meshing method, the geometry, your goals for the simulation, etc. Because of that you might want to contact support@pointwise.com on Monday.
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops | avinashjagdale | OpenFOAM Meshing & Mesh Conversion | 53 | March 8, 2019 09:42 |
[snappyHexMesh] sHM refinement away from surface | nholt | OpenFOAM Meshing & Mesh Conversion | 1 | June 14, 2016 14:36 |
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh | Elise | OpenFOAM Meshing & Mesh Conversion | 1 | April 22, 2013 02:32 |
killed "snappyHexMesh" | parkh32 | OpenFOAM Pre-Processing | 2 | April 8, 2012 17:12 |
[snappyHexMesh] snappyHexMesh aborting | Tobi | OpenFOAM Meshing & Mesh Conversion | 0 | November 10, 2010 03:23 |