CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Pointwise & Gridgen (http://www.cfd-online.com/Forums/pointwise/)
-   -   HOW to define ONE LINE the WALL boundary condition using pointwise V16 (http://www.cfd-online.com/Forums/pointwise/81462-how-define-one-line-wall-boundary-condition-using-pointwise-v16.html)

lachie October 27, 2010 12:40

HOW to define ONE LINE the WALL boundary condition using pointwise V16
 
2 Attachment(s)
hello everyone:
Today i encounted a new problem: i have generated an unstructured grid around a parafoil, to be simpler, it is just a LINE. However, i found it is impossible to define the line the WALL boundary condition. i have tried many times but failed.
i use pointwise V16.02
help!


All times are GMT -4. The time now is 22:43.