|
[Sponsors] |
May 25, 2012, 12:12 |
indicial condition temperature
|
#1 |
Member
David L
Join Date: May 2012
Posts: 43
Rep Power: 13 |
we can see that I don't have inlet temperature
why don't I have in indicial condition temperature? |
|
May 25, 2012, 14:22 |
|
#2 |
Senior Member
Join Date: Oct 2009
Location: Germany
Posts: 636
Rep Power: 21 |
You have only initial conditions for active physics models. So you need to switch on an energy solver in order to have a temperature initial condition to set.
It doesn't make sense to set anything which isn't solved.
__________________
We do three types of jobs here: GOOD, FAST AND CHEAP You may choose any two! |
|
May 25, 2012, 15:08 |
|
#3 |
Member
David L
Join Date: May 2012
Posts: 43
Rep Power: 13 |
What do you mean? sorry you can see the picture same model in two simulation diferent
|
|
May 25, 2012, 18:58 |
|
#4 |
Senior Member
siamak rahimi ardkapan
Join Date: Jul 2010
Location: Copenhagen, Denmark
Posts: 220
Rep Power: 17 |
For the case that you see the temperature, you have segregated fluid temperature, so there is a solver for energy. in another case also, if you need to have the temperature you need to have a solver for energy.
|
|
May 26, 2012, 05:04 |
|
#5 |
Senior Member
Join Date: Oct 2009
Location: Germany
Posts: 636
Rep Power: 21 |
You clearly haven't activated the same physics models in both simulations. That's why you've got different things to specify.
There is an energy solver active in the left simulation. Therefore you need to specify the initial temperature and have got the option to do so. There is no energy solver in the right simulation, therefore you don't have any option to specify the initial temperature. When you experience any issues, it might be worth to give a little more information about what you're trying to do and what the issue is.
__________________
We do three types of jobs here: GOOD, FAST AND CHEAP You may choose any two! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Temperature boundary condition at the pipe outlet | j. mcquire | Fluent UDF and Scheme Programming | 3 | July 8, 2011 02:33 |
temperature outlet boundary condition | sofie1 | FLUENT | 0 | July 12, 2010 17:00 |
Boundary condition for linear temperature | Sushmita | Siemens | 13 | June 21, 2005 06:27 |
temperature below the initial condition | Anna (aka new-user) | Siemens | 3 | December 16, 2004 04:41 |