CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

in-place interface problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 16, 2012, 11:14
Default in-place interface problem
  #1
New Member
 
ajay.mighty@gmail.com
Join Date: Mar 2011
Posts: 1
Rep Power: 0
ajay.mighty is on a distinguished road
I used in-place interface between the porous region and fluid region for my problem. I even initialized the interfaces. But there is no connectivity between the slave and the master faces.

could any one tell me the reason?
ajay.mighty is offline   Reply With Quote

Old   August 16, 2012, 15:33
Default
  #2
Senior Member
 
Join Date: Dec 2010
Posts: 135
Rep Power: 6
eRzBeNgEl is on a distinguished road
Just a guess, maybe imprint the interfaces and try it again! If there is no gap between these interfaces there should be a connection
eRzBeNgEl is offline   Reply With Quote

Old   September 9, 2012, 12:05
Default
  #3
Member
 
Join Date: Dec 2009
Posts: 40
Rep Power: 7
Zeppo is on a distinguished road
You can check an interface by eye. As you pick it in the model tree the faces are highlighted with a color so that you could see if they are right or not. Besides, check a tolerance value within your interface.
Zeppo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 34 October 16, 2014 05:27
Problem with interface Roland R CFX 5 August 16, 2013 08:01
problem with interface in heat conduction josefguerreroj ANSYS 1 June 8, 2013 20:19
Problem with interface in a wind turbine simulation be_inspired FLUENT 2 March 8, 2011 00:46
Interface problem Tomislav FLUENT 4 May 23, 2006 00:49


All times are GMT -4. The time now is 16:17.