|
[Sponsors] |
January 23, 2013, 04:29 |
simulate a mixer and FSI
|
#1 |
New Member
Suta Setasena
Join Date: Jan 2013
Posts: 7
Rep Power: 13 |
My simulation project is actually to simulate FSI (Fluid Structure Interaction) in Star ccm+. Abdul099 (Thank you so much) adviced me, to make a good meshing first and then go to the next step. (look at the picture:mixer_example)
I than first tried to make sure that I have done the correct meshing. But one of my friend told me to first create 2 rooms for the simulation before I start with my meshing. The room where all the water will flow (Which also represent as the mixer chamber), and a room to describe the rotation of mixer. is this the only method and much more complicated? Why we should actually create two rooms? can we directly just need to create 1 room which shows only the mixing chamber, and thats it. (look at the _ mixer_chamber) thank you for your advice. |
|
January 23, 2013, 05:36 |
|
#2 |
Senior Member
siamak rahimi ardkapan
Join Date: Jul 2010
Location: Copenhagen, Denmark
Posts: 220
Rep Power: 17 |
Hi
I think it is better that you do first by following some tutorial. to do that Press F1 and then search in the search box: tutorial guide >motion. In this section you will see examples for motion. Follow the steps of some of the examples to get how to work.
__________________
Good luck Siamak |
|
|
|