CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Morphing/Grid Flux question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2013, 00:22
Default Morphing/Grid Flux question
  #1
New Member
 
AndrewLBloxom's Avatar
 
Andrew L. Bloxom
Join Date: Dec 2010
Location: Blacksburg, VA
Posts: 7
Rep Power: 15
AndrewLBloxom is on a distinguished road
Good evening,


I have a question about the morpher model.

In the documentation for 7.04.011: Best Practices > Modeling Fluid-Structure Interaction > What is Fluid Structure Interaction? Dynamic Mesh Evolution > Morphing in FSI: The last sentence describes completely re-meshing the model.

I've been able to extract the volume boundary and remesh the fluid domain, as well as set up the Abaqus input deck for the "*import" restart, but I'm curious about how the grid flux is reset after the re-mesh. I realize the grid is reset wholly, but I was wondering if there is not some way to also interpolate the grid fluxes, at least from the co-simulation boundary onto the new mesh, so that when the next co-simulation step occurs, the missing grid fluxes on the co-simulation boundary do not cause the simulation to diverge.


I'm currently working on an automatic re-mesh macro for my FSI work, and I believe this to be the last problem before it works successfully. Of course, I may be overlooking some fact about the morphing process, and would be grateful for any assistance.


Thanks,
Andrew
AndrewLBloxom is offline   Reply With Quote

Old   July 31, 2014, 09:41
Default
  #2
Member
 
Arun Krishnan.L.H
Join Date: Jan 2013
Posts: 75
Rep Power: 13
arun7328 is on a distinguished road
Hey,

I have a doubt in co-simulation. Can you please help me?

Regards
Arun
arun7328 is offline   Reply With Quote

Reply

Tags
co-simulation, fsi, grid flux, morpher

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDS Flux Function Problem sunbird04 FLUENT 6 April 28, 2014 03:58
Problem setting with chtmultiregionFoam Antonin OpenFOAM 10 April 24, 2012 10:50
Basic question: UDF for wall heat flux Carl FLUENT 1 August 5, 2006 20:01
Question on flux matching hirokata FLUENT 0 February 23, 2006 02:03
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 06:30.