CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Zero radial coordinates found on non-axis face in boundary OUTLET (http://www.cfd-online.com/Forums/star-ccm/113491-zero-radial-coordinates-found-non-axis-face-boundary-outlet.html)

Vassilis February 20, 2013 13:01

Zero radial coordinates found on non-axis face in boundary OUTLET
 
Hi!
I am dealing with an axisymetric turbulent jet. The problem is that when i try to initialize solution i get this message: Zero radial coordinates found on non-axis face in boundary OUTLET. I can't understand whats the problem, so if anyone can help me find a solution it would be great!
Thnx!

grad@itu February 27, 2013 06:27

Hi Vassilis,

If you want to set up an axisymmetric model,

1. Converting plane(for convert 3D to 2D operation) have to be XY plane, that is, 3D mesh compress through the Z axis.

2. You have to choose correct axis for given geometry, i think your problem is here (setup boundary type).


All times are GMT -4. The time now is 07:19.