CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

No convergence with k-omega sst

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 4, 2013, 09:05
Default No convergence with k-omega sst
  #1
New Member
 
Tobi
Join Date: Mar 2013
Posts: 26
Rep Power: 13
kannstmasehn is on a distinguished road
Hi all,

I am trying to get a solution for my stairmand cyclone separator with k-omega sst but it won't converge. K-epsilon works within 1000 iterations down to 9E-3 for the residuals on the mesh but k-omega sst just diverge. What could be the problem? It is still 1-phase and the wall y+ is below 1. Can someone help me? The mesh has 800k cells. Maybe it need to be finer?

best regards

Last edited by kannstmasehn; April 5, 2013 at 03:47.
kannstmasehn is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
overshooting of Omega in SST komega using simpleFoam cm_jubayer OpenFOAM 2 June 7, 2020 13:52
SST k-w model--the parameter 'omega' does not convergence zyy95900 FLUENT 4 May 7, 2012 00:58
Force can not converge colopolo CFX 13 October 4, 2011 23:03
Boundary Conditions for k omega SST dancfd OpenFOAM Pre-Processing 0 June 10, 2011 00:25
Convergence issue in SST for Porous model Raj CFX 0 May 2, 2008 03:43


All times are GMT -4. The time now is 20:51.