CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

rough wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 4, 2013, 21:44
Default rough wall
  #1
Member
 
adam
Join Date: Oct 2011
Posts: 52
Rep Power: 5
sieginc. is on a distinguished road
If I have a fluid/solid interface between a heat generating object and air, if I wanted to represent the object as having a roughness (for example, a transformer with bundles of windings), where would I apply this? Would I go under the fluid region and find the interface corresponding to the same solid surface and change the wall from smooth to rough? Or would I change the boundary and not the interface to rough? Or both? There is no smooth/rough option with solid region boundaries.

I'm looking at how the roughness affects the heat transfer from the object, but so far after changing the fluid interface to rough and rerunning the simulations everything looks the same. Maybe this is the correct result, or maybe I'm applying the roughness incorrectly I do not know.
sieginc. is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
StitchMesh on two patches anita OpenFOAM Native Meshers: blockMesh 31 April 4, 2013 11:51
Is wall ajacent temperature equal to conservative temperature of the wall? shenying0710 CFX 8 January 4, 2013 05:03
strange solver behavior---Treatment of Rough Wall Yi CFX 6 April 14, 2010 18:31
Rough walls and SST (CFX11) Sans CFX 2 October 3, 2007 06:12
the law of the wall for rough surface maximus Main CFD Forum 0 January 31, 2004 09:45


All times are GMT -4. The time now is 19:10.