CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

surface repair problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 16, 2013, 15:02
Default surface repair problem
  #1
New Member
 
shoumo
Join Date: Jun 2013
Posts: 16
Rep Power: 12
amarjogot is on a distinguished road
Hello every one. Hoping every one is doing fine. I am very new to star CCM+. I am trying to run a simulation using tornado vortex chamber. The details are shown in the figure. I try to build the geometry in Star CCM+ but when i repair the surface it showed me 576 pierced surface and 192 face proximity. If possible can any one help me with this problem? the radius of the cylinder is .4m and the inlet is .41m and side wall is 1.66 m.

Zoheb
Attached Images
File Type: jpg fig 2.jpg (28.1 KB, 10 views)
amarjogot is offline   Reply With Quote

Old   July 16, 2013, 16:51
Default
  #2
New Member
 
kw
Join Date: Oct 2011
Posts: 24
Rep Power: 14
Kasey is on a distinguished road
How are you building your geometry? I don't think face proximity will be an issue, and likely pierced faces won't either, but the geometry of this seems like it shouldn't be happening. If you are creating the two sections as two seperate cylinders, make sure the two bases that are connected are deleted, and then zip the free edges together. You should have no problems.
Kasey is offline   Reply With Quote

Old   July 17, 2013, 12:20
Default
  #3
New Member
 
shoumo
Join Date: Jun 2013
Posts: 16
Rep Power: 12
amarjogot is on a distinguished road
Thank you very much Kasey. Its working absolutely fine. I really appreciate your health.
amarjogot is offline   Reply With Quote

Reply

Tags
repair surface, star ccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
free surface problem with capillary effect rabbitmelon CFX 25 August 16, 2013 04:05
Problem in specifying the boundary condition for tank's surface which is on fire BHE FLUENT 1 March 22, 2013 00:02
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 09:52
surface orentation problem in icemcfd jeevan kumar CFX 0 August 18, 2008 05:25
Surface orentation problem in icemcfd jeevan kumar CFX 0 August 13, 2008 02:54


All times are GMT -4. The time now is 05:29.